Plastic Data Sheets

Aspect Black LDPE PCR 1.9 is suitable for film extrusion processes. It is a low-density polyethylene (LDPE) variant with a PCR (Post-Consumer Recycled) composition. It is available in black or grey color options. The material exhibits a melt flow rate ranging from 0.5 to 2.0 g/10 min, as measured by the ASTM D1238 test method.

Aspect Black PP PIR 32 is a globally available material known for its sustainable composition. With a tensile strength at yield ranging from 2.4 to 2.8 kpsi, as tested using the ASTM D638 method, Aspect Black PP PIR 32 exhibits excellent strength and durability.

Aspect Black PP PIR 20 is a high-quality material in black color available globally. With a density range of 0.905 to 0.930 g/cm³ at 23/23°C, as tested using the ASTM D792 method, Aspect Black PP PIR 20 strikes a balance between strength and lightweight properties.

This product is derived entirely from 100% Ocean bound material. It features a natural color, and is available in drops, measuring approximately 4mm. G2.00.70LDPE.NC.XX00.IN has a specific Melt Flow Rate (MFR) of 0.7 ± 0.2 g/10min, as measured by the DIN EN ISO 1133 method at a temperature of 190°C and a load of 2.16 kg.

G2.00.30HDPE.NC.XX00.TH is specifically designed for extrusion and blow molding processes, making it suitable for a range of industries. Choose G2.00.30HDPE.NC.XX00.TH for its compatibility with extrusion and blow molding processes, enabling you to create high-quality products in natural color.