Plastic Data Sheets

59 Data Sheets

Hide Filters

Sustainable Solutions

  • Bio-Attributed(9)
  • Bio-Circular Attributed(9)
  • Biobased(11)
  • Compostable(9)
  • Ocean-bound(13)
  • PCR(11)
  • PIR(4)

Producer

  • #tide(13)
  • AFC EcoPlastics(9)
  • SK Chemical(4)
  • The Aspect Company(15)
  • Versalis(18)

Product Family

  • HDPE(12)
  • LDPE(10)
  • LLDPE(6)
  • Nylon 6(0)
  • PBAT(2)
  • PBS(2)
  • PETG(4)
  • PLA Compound(5)
  • PP(12)
  • rPET(6)

Processing Type

  • Blow Molding(10)
  • Blown Film(17)
  • Extrusion(4)
  • Extrusion Blow Molding(1)
  • Extrusion Coating(3)
  • Film Extrusion(1)
  • Injection Molding(26)
  • Ocean-Bound(0)
Ocean-bound

G1.00.65PET.NC.GF20.TH

Producer Name: #tide
Product Family: rPET
Processing Type: Injection Molding

G1.00.65PET.NC.GF20.TH is an exceptional material that stands out for its sustainable qualities. It is composed of 100% Ocean bound material, emphasizing its commitment to preserving our oceans and tackling plastic waste. It is available in pellets with a 4mm size and a clear grey color.

PIR

Aspect Natural PP PIR 20

Producer Name: The Aspect Company
Product Family: PP
Processing Type: Injection Molding

PP PIR 20 is a globally available product with natural color made from post-industrial recycled polypropylene, which emphasizes its commitment to recycling and reducing environmental impact. PP PIR 20’s density range of 0.895 to 0.919 g/cm3 was measured using the ASTM D792 test method at 23/23°C.

PIR

Aspect Natural PP PIR 34

Producer Name: The Aspect Company
Product Family: PP
Processing Type: Injection Molding

Natural PP PIR 34 is a product copolymer made up of Post-Industrial Recycled (PIR) polypropylene, which emphasizes its commitment to the environment through its use of biodegradable material. This variant boasts an impressive opacity level of less than 91%, as determined by the ASTM E1164 test method.

PCR

Aspect FDA HDPE PCR 03

Producer Name: The Aspect Company
Product Family: HDPE
Processing Type: Injection Molding

FDA HDPE PCR 03 is composed of 100% FDA-approved Post-Consumer Recycled (PCR) high-density polyethylene (HDPE). This variant exhibits impressive tensile strength at a yield of 23 ± 5 MPa when tested at a rate of 50mm/min. Aspect FDA HDPE PCR 03’s natural color and globally available.

PCR

Aspect FDA PP PCR 13

Producer Name: The Aspect Company
Product Family: PP
Processing Type: Injection Molding

FDA PP PCR 13 is globally available. It is composed of 100% FDA-approved Post-Consumer Recycled (PCR) polypropylene. This variant comes in natural color, with a density range of 900 to 920 Kg/m3.

Results |

    Contact Us

    Speak to a Recycled Plastic Expert